View source for ThorLabs FPL1009S

'''ThorLabs FPL1009S: Fabry-Perot Laser Diode'''

The ThorLabs FPL1009S is a high-power, 1550 nm Fabry-Perot laser diode housed in a type 1, 14-pin butterfly package. It features an integrated TEC element and is coupled to 1.5 m of FC/APC-connectorized single-mode (SM) fiber.

<span id="key-specifications"></span>
== Key Specifications: ==

* '''Center Wavelength''': 1530 nm to 1570 nm, with a typical value of 1550 nm.
* '''Spectral Bandwidth (RMS)''': Up to 20 nm, with a typical value of 10 nm.
* '''Output Power''': Up to 100 mW, with a typical value of 80 mW.
* '''Operating Current''': Up to 500 mA, with a typical value of 400 mA.
* '''Threshold Current''': Up to 55 mA, with a typical value of 35 mA.
* '''Forward Voltage''': Up to 1.8 V, with a typical value of 1.4 V.
* '''Slope Efficiency''': Up to 0.3 W/A, with a typical value of 0.2 W/A.
* '''Operation Chip Temperature''': 25 °C.
* '''Operation Case Temperature''': 0 °C to 70 °C.

<span id="modulation-capabilities"></span>
== Modulation Capabilities: ==

* The FPL1009S can be modulated, with expected modulation frequencies exceeding 100 MHz, although specific maximum modulation frequencies are not provided by the manufacturer[1][2].

<span id="safety-and-classification"></span>
== Safety and Classification: ==

* The laser diode is classified according to the International Electrotechnical Commission (IEC) document 60825-1, which outlines the safety of laser products. Users should follow safe practices and use appropriate safety equipment to reduce the risk of accidents or injuries[2].

<span id="references"></span>
== References: ==

# '''ThorLabs Catalog Page''': https://www.thorlabs.com/catalogpages/V21/1418.PDF
# '''ThorLabs Product Page''': https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=4190
# '''ThorLabs Single Mode Pigtailed Laser Diodes''': https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1489 (for general information on similar products)