ThorLabs FPL1009S

ThorLabs FPL1009S: Fabry-Perot Laser Diode

The ThorLabs FPL1009S is a high-power, 1550 nm Fabry-Perot laser diode housed in a type 1, 14-pin butterfly package. It features an integrated TEC element and is coupled to 1.5 m of FC/APC-connectorized single-mode (SM) fiber.

Key Specifications:

• Center Wavelength: 1530 nm to 1570 nm, with a typical value of 1550 nm.
• Spectral Bandwidth (RMS): Up to 20 nm, with a typical value of 10 nm.
• Output Power: Up to 100 mW, with a typical value of 80 mW.
• Operating Current: Up to 500 mA, with a typical value of 400 mA.
• Threshold Current: Up to 55 mA, with a typical value of 35 mA.
• Forward Voltage: Up to 1.8 V, with a typical value of 1.4 V.
• Slope Efficiency: Up to 0.3 W/A, with a typical value of 0.2 W/A.
• Operation Chip Temperature: 25 °C.
• Operation Case Temperature: 0 °C to 70 °C.

Modulation Capabilities:

• The FPL1009S can be modulated, with expected modulation frequencies exceeding 100 MHz, although specific maximum modulation frequencies are not provided by the manufacturer[1][2].

Safety and Classification:

• The laser diode is classified according to the International Electrotechnical Commission (IEC) document 60825-1, which outlines the safety of laser products. Users should follow safe practices and use appropriate safety equipment to reduce the risk of accidents or injuries[2].

References:

1. ThorLabs Catalog Page: https://www.thorlabs.com/catalogpages/V21/1418.PDF
2. ThorLabs Product Page: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_id=4190
3. ThorLabs Single Mode Pigtailed Laser Diodes: https://www.thorlabs.com/newgrouppage9.cfm?objectgroup_ID=1489 (for general information on similar products)

Other info

• Status: OK
• Last known location: Balcão (dentro)
• Serial: FPL-17821
• Inventory ID:
• Arrival Date: 01/06/2012
• Keywords: fabry perot 1550
• Old LCO ID: LCO530901
• Old LCO Category: Óptico - Laser